Messages

 :)Yes Thank you very much

Same here !

74med
France / Annecy
26 ans

hi teeds thank you its works.
.ini was in .txt .
everything works
Enormously thank you to you guys 

hi  thank you very much for your help.
I almost succeeded ... just when I run mxbikesservers. it will not start the settings of my files serversettings.ini (-dedicated 10411 -set params serversettings.ini)

My .ini file configuration :

[connection]
name = 74med Freeride;
maxclient = 6;
password =
admin_password = 1234;
bandwidth = 2; 0 -> low, 1 -> medium, 2 -> high
max_ping = ; milliseconds. 0 -> no limit
whitelist = ; the filename of the whitelist
blacklist = ; the filename of the blacklist
polls_disable = ; if set to 1, polls are disabled
location = FR; information about server location
MOTD = ; message of the day. Use "/r" to split the message in multiple lines.

[export]
results =  ; html or xml. If set it will automatically export results at the end of the last session
directory = ; the directory where results will be saved ( must exist )
units =  ; 0 -> metric units, 1 -> US units, 2 -> UK units

[replay]
save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = ; the directory where replays will be saved ( must exist )

[event]
name = ; the name of the event ( optional )
track = Enduro; track ID ( for ex. Practice )
track_layout = ; track layout ( for ex. Short ). Empty -> Default;
track1 = ;
track1_layout = ;
category = ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2

[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199

[weather]
realistic = 0; 0 or 1, if set to 1, following params are ignored
conditions = 0; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = 28; air temperature, celsius
wind_direction = 0; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-west
wind_speed = 0; meters/second
track_conditions = 0; 0 -> dry, 1 -> wet

[hardcore]
force_cockpit = ; 0 or 1
no_aids = ; 0 or 1
limited_tyre_sets = ; 0 or 1

[race]
quick_race = ; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = 500; minutes
prequalify_length = ; minutes
warmup_length = ; minutes
sighting_lap = 0; 0 or 1
race_length = ; % of full length
race_use_laps = 1; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = 6; number of race laps
restart_delay = ; server restart time in seconds
pause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, prequalify, qualify, warmup, race1 or race2
pause_directory = ; the directory where data is saved. The default is "resume"
resume = ; the file to load to resume an event
save = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ; practice, prequalify, qualify, warmup, race1 or race2
save_directory = ; the directory where data is saved. The default is "resume"

[live]
enable = ; 1 to enable live timing
port = 10411; the UDP port
password =

[collisions]
disable = 0; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1

[deformation]
scale = 1; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )

And when i start i have this (look picture)


THANKS A LOT

see you

hello , I read the message for create dedicated server  (PiBoSo) but I don't understand anything.

Can you explain me in detail steps to follow?

My port is already open at 10400 to 10410 
it's ok?

Because i want to create an enduro and freeride server

thank you very much for your help.
Have good day

+1 Yes Need too 

[x=1920]

Hey go to my documents/PiBoSo/Mxbikes/profil/go in your profil folder/and open profil.ini
Now watch that :you need to change that

[gfx]
x=1920
y=1080
fullscreen=1


BYe see you soon

hey  just to say that my problem is solved . I had the old version of the motorcycle . now online it's ok.
Thanks a lot
see you on server buddy 

BEST EVER TRY !!
THANK YOU SO MUCH!!
Keep it up !! 

Thank you for sharing your work!!
I love this bike
Keep it up buddy !!

So.... I loveeeee !!!

Thanks so much!!

Nice work buddy keep it up !!

Hey yes we saw you ahead
A big thank you for your help and your time. it's good my game works!! I already had the motorcycles but older versions . thank you very much.
See you on the server a +

Hi BadStar Thank for your time i appreciate

1) I waited 15 minutes on always connected  but nothing happen
2) I only use PiBoSo MSM
3) No password im sure about that
4) i have the correct bike class 
5) I move all the mods in another folder outside installation folder, I uninstall all the game I reinstall without mods just the basic content

6) i only can join www.mxb-central.com 1 server practice short track

... but I have the same problem      (my friend buy the game 2 days ago and he has a same problem too)

thank you again for your answers and your help. I hope to solve this F.. problem

See you

Hello , it is now three days that I try to play multiplayer !!(i have license key and i already play online)
I uninstall and reinstall the game several times but its still not working . there are only the short track driving server running(www.mxb-central.com 1.
I realy Need help please . can someone try any servers ??
thanks you for your reply guys