hello , I read the message for create dedicated server (PiBoSo) but I don't understand anything.
Can you explain me in detail steps to follow?
My port is already open at 10400 to 10410
it's ok?
Because i want to create an enduro and freeride server :)
thank you very much for your help.
Have good day :)
port forward your router, i used port 10412 for mine. then create a shortcut of your mxbikes.exe, and rename it to something such as mxbikesserver. then right click on the shortcut and go to properties and put this in it mxbikes.exe -dedicated 10412 -set params dedicated.ini
now the dedicated.ini can be whatever you want, such as serversettings.ini. dedicated.ini/serversettings.ini is where you set the settings for the server, such as track/laps and such and other random things, make sure this file is inside your mx bikes directory C:\Program Files (x86)\MX Bikes
now that youve created your serversettings.ini or dedicated.ini(if your using serversettings.ini change the properites that i put above to this, mxbikes.exe -dedicated 10412 -set params serversettings.ini) open it up and put what pisbo put in the dedicated server documentation and edit it as needed.
[connection]
name =
maxclient =
password =
admin_password =
bandwidth = ; 0 -> low, 1 -> medium, 2 -> high
max_ping = ; milliseconds. 0 -> no limit
whitelist = ; the filename of the whitelist
blacklist = ; the filename of the blacklist
polls_disable = ; if set to 1, polls are disabled
location = ; information about server location
MOTD = ; message of the day. Use "/r" to split the message in multiple lines.
[export]
results = ; html or xml. If set it will automatically export results at the end of the last session
directory = ; the directory where results will be saved ( must exist )
units = ; 0 -> metric units, 1 -> US units, 2 -> UK units
[replay]
save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = ; the directory where replays will be saved ( must exist )
[event]
name = ; the name of the event ( optional )
track = ; track ID ( for ex. Practice )
track_layout = ; track layout ( for ex. Short ). Empty -> Default;
category = ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2
[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199
[weather]
realistic = ; 0 or 1, if set to 1, following params are ignored
conditions = ; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = ; air temperature, celsius
wind_direction = ; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-west
wind_speed = ; meters/second
track_conditions = ; 0 -> dry, 1 -> wet
[hardcore]
force_cockpit = ; 0 or 1
no_aids = ; 0 or 1
limited_tyre_sets = ; 0 or 1
[race]
quick_race = ; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = ; minutes
prequalify_length = ; minutes
warmup_length = ; minutes
sighting_lap = ; 0 or 1
race_length = ; % of full length
race_use_laps = ; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = ; number of race laps
restart_delay = ; server restart time in seconds
pause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, prequalify, qualify, warmup, race1 or race2
pause_directory = ; the directory where data is saved. The default is "resume"
resume = ; the file to load to resume an event
save = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ; practice, prequalify, qualify, warmup, race1 or race2
save_directory = ; the directory where data is saved. The default is "resume"
[live]
enable = ; 1 to enable live timing
port = ; the UDP port
password =
[collisions]
disable = ; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1
[deformation]
scale = ; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )
this is my dedicated.ini file
[connection]
name = Cody's erode on;
maxclient = 10;
password =
admin_password = 1234;
bandwidth = 2; 0 -> low, 1 -> medium, 2 -> high
max_ping = ; milliseconds. 0 -> no limit
whitelist = ; the filename of the whitelist
blacklist = ; the filename of the blacklist
polls_disable = ; if set to 1, polls are disabled
location = ; information about server location
MOTD = ; message of the day. Use "/r" to split the message in multiple lines.
[export]
results = ; html or xml. If set it will automatically export results at the end of the last session
directory = ; the directory where results will be saved ( must exist )
units = ; 0 -> metric units, 1 -> US units, 2 -> UK units
[replay]
save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = ; the directory where replays will be saved ( must exist )
[event]
name = ; the name of the event ( optional )
track = club; track ID ( for ex. Practice )
track_layout = ; track layout ( for ex. Short ). Empty -> Default;
track1 = maryland;
track1_layout = ;
category = ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2
[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199
[weather]
realistic = 0; 0 or 1, if set to 1, following params are ignored
conditions = 0; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = 28; air temperature, celsius
wind_direction = 0; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-west
wind_speed = 0; meters/second
track_conditions = 0; 0 -> dry, 1 -> wet
[hardcore]
force_cockpit = ; 0 or 1
no_aids = ; 0 or 1
limited_tyre_sets = ; 0 or 1
[race]
quick_race = ; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = 500; minutes
prequalify_length = ; minutes
warmup_length = ; minutes
sighting_lap = 0; 0 or 1
race_length = ; % of full length
race_use_laps = 1; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = 6; number of race laps
restart_delay = ; server restart time in seconds
pause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, prequalify, qualify, warmup, race1 or race2
pause_directory = ; the directory where data is saved. The default is "resume"
resume = ; the file to load to resume an event
save = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ; practice, prequalify, qualify, warmup, race1 or race2
save_directory = ; the directory where data is saved. The default is "resume"
[live]
enable = ; 1 to enable live timing
port = 10412; the UDP port
password =
[collisions]
disable = 0; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1
[deformation]
scale = 1; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )
hi :) thank you very much for your help.
I almost succeeded ... just when I run mxbikesservers. it will not start the settings of my files serversettings.ini (-dedicated 10411 -set params serversettings.ini)
My .ini file configuration :
[connection]
name = 74med Freeride;
maxclient = 6;
password =
admin_password = 1234;
bandwidth = 2; 0 -> low, 1 -> medium, 2 -> high
max_ping = ; milliseconds. 0 -> no limit
whitelist = ; the filename of the whitelist
blacklist = ; the filename of the blacklist
polls_disable = ; if set to 1, polls are disabled
location = FR; information about server location
MOTD = ; message of the day. Use "/r" to split the message in multiple lines.
[export]
results = ; html or xml. If set it will automatically export results at the end of the last session
directory = ; the directory where results will be saved ( must exist )
units = ; 0 -> metric units, 1 -> US units, 2 -> UK units
[replay]
save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = ; the directory where replays will be saved ( must exist )
[event]
name = ; the name of the event ( optional )
track = Enduro; track ID ( for ex. Practice )
track_layout = ; track layout ( for ex. Short ). Empty -> Default;
track1 = ;
track1_layout = ;
category = ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2
[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199
[weather]
realistic = 0; 0 or 1, if set to 1, following params are ignored
conditions = 0; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = 28; air temperature, celsius
wind_direction = 0; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-west
wind_speed = 0; meters/second
track_conditions = 0; 0 -> dry, 1 -> wet
[hardcore]
force_cockpit = ; 0 or 1
no_aids = ; 0 or 1
limited_tyre_sets = ; 0 or 1
[race]
quick_race = ; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = 500; minutes
prequalify_length = ; minutes
warmup_length = ; minutes
sighting_lap = 0; 0 or 1
race_length = ; % of full length
race_use_laps = 1; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = 6; number of race laps
restart_delay = ; server restart time in seconds
pause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, prequalify, qualify, warmup, race1 or race2
pause_directory = ; the directory where data is saved. The default is "resume"
resume = ; the file to load to resume an event
save = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ; practice, prequalify, qualify, warmup, race1 or race2
save_directory = ; the directory where data is saved. The default is "resume"
[live]
enable = ; 1 to enable live timing
port = 10411; the UDP port
password =
[collisions]
disable = 0; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1
[deformation]
scale = 1; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )
And when i start i have this (look picture)
THANKS A LOT
see you
You're getting server defaults, so make sure your serversettings.ini file is located in the MXBikes folder you have your server shortcut pointed to.
hi teeds thank you its works.
.ini was in .txt .
everything works
Enormously thank you to you guys :D