Model made by Jay, transfert to mxb by me with the help of Pacopastor.
Here is the original release where you can find the psd http://forum.mxsimulator.com/viewtopic.php?f=25&t=40364
250:http://www.mxb-central.com/2016-husqvarna-fc-250/ (http://www.mxb-central.com/2016-husqvarna-fc-250/)
350: http://www.mxb-central.com/2016-husqvarna-fc-350/ (http://www.mxb-central.com/2016-husqvarna-fc-350/)
450: http://www.mxb-central.com/2016-husqvarna-fc-450/ (http://www.mxb-central.com/2016-husqvarna-fc-450/)
bikes are going to fall from the sky guys :D :D :D
Oh yes, the whitey one is here...
I love you guys #nohomo ;D
Thanks for he upload, I'm loving all of these new bikes.
Beautiful, cheers man :)
*LINKS REMOVED* Requested by the original creator.
hey guys, i thought the husqvi is allowed for mxb? just ktm isnt allowed or did i understood this stupid controversity about bikes and creator wrong!?
and if its allowed, what do we have to do to ride it in beta 5?
Quote from: Braap570 on December 30, 2016, 03:07:22 PM
what do we have to do to ride it in beta 5?
Just wait a lil bit more ! it's coming ;)
sounds awesome just bought the 2k17 450 fc in real.... so i will ride this bike also in mxb :D :D :D
>>> 22.03.2017 : Beta 6 and OEMs : Husky Pack v2.0 <<<
Finally got around to convert those. 250f 350F and 450f, thanks to Stone importing them and letting me redo geometry and engine.
These are meant to replace the fc250, fc350 and fc450 bikes - paints are compatible though.Standard bikes- Geometry as close as I could to real data + suspension changes in the cfg. Rest is based on MSM, including chassis flex.
- all bikes share the exact same geometry.
OEM bikes
- Based on Std bikes
- Weight, brakes, fuel, etc all according to manufacturers specs.
- Engines done according to 2016 dynoes, and the OEM breaking torque curves.
- 350f engine redone, including breaking torque.
- Different engine maps added, based on the different modes accessible with the bike.
- Standard: Stock hp curve, rather full at low RPMs but limited at high RPMs.
- Aggressive: More of an aggressive map. mid/high RPM.
- Mellow: A smoother power curve, softening up the low/mid RPMS but pulling linearly and longer.
Download link:
Husky Std + OEM v2.0 (https://mega.nz/#!EUwkDSqY!Zaz2Bi1jnQ-BHuQNz-do9brw-NKeLkCEWee1T9kY0Xk)
Necessary Geo Tyre Mod (http://forum.mx-bikes.com/index.php?topic=1451.0) for the OEM bikes to work.
The 350f engine is completely new. From what I could see, it's basically a booster 250f. It feels like one. Let me know if it's completely out of whack and I'll do my best to fix it. I admit this whole pack is a bit rushed as I wanted it out now, so feedback especially welcome!
Quote from: geofanatec on March 23, 2017, 02:18:41 PM
Haha........habit :)
No worse than asking about setups loading :o
Hahaha much worse Geo.. We grew up without the z's and f's and the end of our models mate, you should know better! ;)
stop bitching start giving feedback omg
The handlebar pad is wonky mate ;) lmao
Very grateful you've taken the time to do these. For some reason the Husky was one of my faves from b5.. Not entirely sure why, but hey :)
Quote from: TFC on March 23, 2017, 05:32:08 PM
Very grateful you've taken the time to do these. For some reason the Husky was one of my faves from b5.. Not entirely sure why, but hey :)
Well, let' say the geometry is "slightly" different compared to their initial introduction in game. They ride a bit like the RMZ now but with a more brutal engine. Short offset, long wheelbase, rather short stock gearing but a better staged gearbox (imo). I would not recommend this one to anyone in love zith the KXF, drastically different behaviour (but might be might new favorite along the YZF for 250f. Still gotta try to the 450 properly).
250/450 are so far awesome! ;)
>>> 27.3.2017 : SHAKDATASS PATCH 450/350 OEM - FC Std + OEM v 2.1<<<
Did some extensive testing after having been made aware of somes issues pushing the 450f OEM, the rear being extremely uncontrolable when braking and at low speeds, severly limiting corner entry speed and giving a "tipitoe" feeling when below 3rd gear. Issue found and fixed.
Changes only in the 450f engine files: braking torque reduced, back to MSM values. Also slightly increase the 350f on the same general idea.
Engine files to drop in your FC450/350 OEM folder: FC450/350OEM v2.1 patch (https://mega.nz/#!QJJThZZa!CKyZt0cpD2OB7KWwS7_Y9TxDJ7Dz7dNMGARxOF615-E) (<- you only need this if you already had the pack. Don't forget to delete when comes the time to OneStopSync your files).
Complete pack v2.1: 2016 Huski FC Std + OEM pack v2.1 (https://mega.nz/#!pch1RBJB!y0Z6bZhWxrFONwRxBRvW-QtobgB60wlDv_swyNE5Y7o) (all in .pkz already).
Reminder: OEM bikes need Geo's Tyres (http://forum.mx-bikes.com/index.php?topic=1451.0) to work.
Please direct general feedback on the OEM changes to this thread: http://forum.mx-bikes.com/index.php?topic=1666.0 ; and keep the model specific here ;)
endless thanks to everyone involved for your huge work! (actually I'd say this to every person who made something for this sim)
How can we had paints now with pkz files ?
Quote from: Yann on March 31, 2017, 10:37:00 AM
How can we had paints now with pkz files ?
create a folder using the exact bike name with a sub folder called paints inside that, then dump your paints in there.
Or rename the .pkz to .rar and extract the folder inside into your bikes folder
Ok thanks ;)