MX Bikes Official Forum

Mods => Tracks => Topic started by: pacopastor34 on June 12, 2016, 04:46:26 PM

Title: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 12, 2016, 04:46:26 PM
Here it is! The final version of Factory SX Training Facility

Hope you like it


(https://s32.postimg.org/z21zdggc5/track_image.png)

https://www.youtube.com/v/jIvndRaGAIc

Track link: https://mega.nz/#!jZMx3RjA!dwxVhm6717_VbiRD0e6gue8ZHdZdUVKiB0gQrAozChE

MXBC Link: Uploaded
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: BadStar on June 12, 2016, 04:54:04 PM
Awesomeness!



Edit: It feels like Arena cross!
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: pacopastor34 on June 12, 2016, 05:18:18 PM
I woud like you to give me some ideas for the main tabletop in order to make it more "whipable", Maybe longer or replace it with a double or a triple?
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: 𝖙𝖋𝖈 on June 12, 2016, 05:40:54 PM
Nice man! It reminds me of amateur arenacross tracks, just with a better layout.

You could maybe make the main tabletop more whippable by giving the take-off a better transition, right now it's very mellow, if you lowered it towards the bottom and then curved up to a consistent angle you'd get a bit more pop and it would be easier to whip.

Keep at it man! very fun. 8)
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: BadStar on June 12, 2016, 07:13:36 PM
Fats is right, its more on the face of the jump that makes it good for whips...table/double/triple, doesnt matter really. Nice curve and not too short will make whips nice!
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: Wedgewood on June 12, 2016, 09:50:49 PM
Awesome job!  I really like the layout
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: pacopastor34 on June 13, 2016, 09:04:54 PM
1st post updated. What do you think about the new jumps?
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: BadStar on June 13, 2016, 09:16:49 PM
I think they are good! The first requires a bit of breaking and the second gets some nice air, see the ceiling :)

You have a jump somewhere in the middle that is maybe too short? it kicks the rear of the bike too high.. I am at work and am unable to direct you to the exact jump. Its after a left hand turn, immediate jump but kicks the rear..

I know its a WIP, but some very light "smoothing" brush would do this track great justice!

Very fun.

Maybe I can join in more creations when I can learn a dang object. haha


*you should go ahead and call it Arenacross.. very fitting and adds a new setting that doesn't exist in MXB!
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: pacopastor34 on June 13, 2016, 10:04:50 PM
Yeah, I like it, I think use that "place" and make different layouts.

I know what jump you said. It's too big and the bike bumps out the landing. I make a big big whip there but it needs to be smoothed.

I can help you with the objects. I followed exactly what TFC explained on his video and I used 3ds max 2015. I import the file, create a tape with the y and x measures of the track (ex. 350 x 350, 200 x 200 in meters) and when the track is imported to the scene, I scale it uniformly to the end of the tape and that's it. I put all the objects and then export all the objects without the terrain in fbx.

How you can live without put objects on your tracks? That damn thing got me. I'm so addicted.
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: BadStar on June 13, 2016, 10:17:03 PM
Haha.. I can't stand not having any objects on my track..so I stopped producing anything until I figure it out.  Maybe this week will be the week I get over that small bump and start adding content to mxb :)
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: pacopastor34 on June 13, 2016, 10:48:45 PM
Quote from: BadStar on June 13, 2016, 10:17:03 PM
Haha.. I can't stand not having any objects on my track..so I stopped producing anything until I figure it out.  Maybe this week will be the week I get over that small bump and start adding content to mxb :)

Let me know and I will help you!
Title: Re: Factory SX Training Facility [WORK IN PROGRESS]
Post by: Jose Reina on June 16, 2016, 10:31:37 PM
Fantastic Track Paco, very very nice! Here one lap in this track ;)

http://www.youtube.com/v/xKcbnKpYcqc&featurereload
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 18, 2016, 04:36:41 PM
FIRST POST UPDATED WITH THE FINAL VERSION
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: ZATOX02 [FR] on June 18, 2016, 05:20:17 PM
very good job track is really nice  ;)
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 25, 2016, 03:19:52 PM
What? I don't understand. Can't you get it on the server? Something wrong with it? I can fix whatever.
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 25, 2016, 04:17:47 PM
Quote from: geofanatec on June 25, 2016, 03:25:09 PM
HAHA! My fault, I didn't download new track on MY PC! LMAO ::)

Hahaha. I was scared! Do you like the final version? Will you use it for the next race? Say yes please! Lol. Edit: Ok I see...its posted!
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: 𝖙𝖋𝖈 on June 27, 2016, 09:08:13 PM
Really enjoying this track, might be fun on pitbikes also?

What kind of lap times are people getting? My fastest so far is a 52 something but averaging about 53's.. What's quick?
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 28, 2016, 10:40:35 AM
This afternoon as soon I get home from work I will upload a KTM 125 SX perfect for this track. It's fun also with pitbikes. I really appreciate that you like this track. I have another one for release today or tomorrow. Dou you know milestone mx complex? I made a "replica" of the 2012 SX layout.
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: 𝖙𝖋𝖈 on June 28, 2016, 10:44:52 AM
A new bike and a new track?? :D
Title: Re: Factory SX Training Facility [RELEASE] 18-06-2016
Post by: pacopastor34 on June 28, 2016, 10:58:42 AM
Quote from: TheFatController on June 28, 2016, 10:44:52 AM
A new bike and a new track?? :D

Yup! An old model that I got here. It's not mine but it can be used with no problem. I used the same engine that Adsrael made for my kx125 but a completely new geom and gear ratios that makes it much more rideable and very very fun. It is 2006 model.