MX Bikes Official Forum

General Category => Races => Topic started by: Umpossible on July 02, 2018, 02:45:28 PM

Title: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 02, 2018, 02:45:28 PM
(https://image.ibb.co/giAjNy/FLCS2.png)

Welcome to the Third Round of the Fast Lap Challenge Series 2!

This round will be held at Archview MX.

(https://preview.ibb.co/iDhbMd/Archview.png)

The Track can be downloaded here: https://www.mediafire.com/file/fye39e1ctoa0khh/archview%283%29.rar (https://www.mediafire.com/file/fye39e1ctoa0khh/archview%283%29.rar)
BIG Thank you to Sandbiter for bringing this awesome track to life in MX Bikes!

This page is where you post both screenshots to record your lap time. The round will open at 12:00am Monday the 2nd of July 2018 MX Bikes time (UTC + 0) and will close at 11:59pm Sunday the 8th of July 2018. No lap times will be counted outside of these times.

This week's bike is the MX1OEM 250 2 Stroke (This can be either the YZ or RM)
These bikes can be downloaded here: https://mega.nz/#!NNQDwKLI!gIgM_3nMdFVGgmvT50qz7Vpx_TcnSwmuEEfzo8aoV-o

BIG Thank You to Asdrael for the OEM Pack!

To find the rules and how to enter the competition click this link for more information:

http://forum.mx-bikes.com/index.php?topic=2181.0

Remember that you may only post your lap time once, so even if you do better after initially posting, your result will not be changed. At the same time, do not leave posting your lap time till the last minute as no posts will be counted after the deadline. I know i'll be posting my lap time a day or two early just to be safe.

A discord has been set up (A big Thank You to PhiliaN) in order for players to talk about their times during the week without having to post their final results here.

https://discord.gg/DS5wc96

Standings

(https://preview.ibb.co/iOAkEy/Screenshot_63.png)
Red indicates the winner of the round
Purple indicates that the person did not compete in that round resulting in the same points as Last + 2

Results will be posted shortly after the cut off time. Depending on the amount of applicants the timing of this could vary from week to week.

Thank you to anyone who enters and competes, this will only be a success through community involvement. So tell any friends who also play MX Bikes and get the word out about the series.

If you have any questions, you are more than welcome to PM me.

Good luck and may the fastest rider win!
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: mmtroop616 on July 03, 2018, 05:16:32 AM
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: iNsane on July 03, 2018, 04:11:06 PM
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 03, 2018, 04:36:25 PM
Quote from: iNsane on July 03, 2018, 04:11:06 PM
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)
Awesome thanks for doing this. We all appreciate it.   :)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 03, 2018, 04:37:12 PM
Quote from: mmtroop616 on July 03, 2018, 05:16:32 AM
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.

Alrighty :) Sounds like a good idea, so you can use a 250 2 stroke this round, YZ or RMZ
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 03, 2018, 04:38:00 PM
Quote from: Twitch135 on July 03, 2018, 04:36:25 PM
Quote from: iNsane on July 03, 2018, 04:11:06 PM
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)
Awesome thanks for doing this. We all appreciate it.   :)

Yeah! Huge thank you! :)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 03, 2018, 04:46:35 PM
Quote from: Umpossible on July 03, 2018, 04:37:12 PM
Quote from: mmtroop616 on July 03, 2018, 05:16:32 AM
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.

Alrighty :) Sounds like a good idea, so you can use a 250 2 stroke this round, YZ or RMZ
Awesome thanks man
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D

Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Mace-x on July 07, 2018, 04:53:55 AM
Quote from: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 07, 2018, 02:14:01 PM
Quote from: Mace-x on July 07, 2018, 04:53:55 AM
Quote from: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 07, 2018, 02:18:48 PM
Quote from: Twitch135 on July 07, 2018, 02:14:01 PM
Quote from: Mace-x on July 07, 2018, 04:53:55 AM
Quote from: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

It's all good, the person above him rode a 450, he is the 2nd and 3rd rider which was on a 250 2 stroke :) I got caught out by it at first as well lol
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 07, 2018, 03:18:56 PM
Quote from: Umpossible on July 07, 2018, 02:18:48 PM
Quote from: Twitch135 on July 07, 2018, 02:14:01 PM
Quote from: Mace-x on July 07, 2018, 04:53:55 AM
Quote from: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

It's all good, the person above him rode a 450, he is the 2nd and 3rd rider which was on a 250 2 stroke :) I got caught out by it at first as well lol
Oh shit! Fuck sorry Mace I was looking at the top of your export and it say's 450, but a little ways down it does say RM 250. My apologies. :-)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Jimqc on July 08, 2018, 01:41:21 AM
my time not very fast this week  :o
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: ChamP_Mx on July 08, 2018, 06:37:29 AM
Ok this is ridiculous, haven't been able to get a decent time not because I cant play, but because this broken ass game wont save my times (only saves my slow times were I crash or take it slow), the thing that sucks is I still played regardless and hoped if I made a fast time it would save but nope, I think its a dnf for me this time boys, almost makes me want to stop doing these lol.
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: CSchmied986 on July 08, 2018, 06:56:23 AM
Just another 1 lapper... Hard to dedicate any time when there is nobody really participating. Hope we can have "real" online soon!
(https://image.ibb.co/bQ1ye8/flcs1.png)
(https://image.ibb.co/cxRs6o/flcs.png)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Leon_Waters on July 08, 2018, 02:36:35 PM
For some reason my ingame screenshot is rip. hope you still accept it. It ain´t no fast time either tbh.
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 08, 2018, 03:46:15 PM
(https://preview.ibb.co/nkuacT/MX_Bikes_08_07_2018_23_09_09.png)
(https://preview.ibb.co/hO5FcT/Screenshot_71.png)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Ruubs on July 08, 2018, 05:36:59 PM
(https://s22.postimg.cc/41gpyy8pd/screencapture-file-_C-_Users-_Ruben-_Documents-_Pi_Bo_So-_MX-_Bikes-expor.png)
(https://s22.postimg.cc/5t9otvmxd/Untitled.png)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 08, 2018, 08:10:33 PM
(https://s8.postimg.cc/m4idn8hoh/rd_3.png) (https://postimg.cc/image/m4idn8hoh/)

(https://s8.postimg.cc/y5m76kvdd/flcrd3.png) (https://postimg.cc/image/y5m76kvdd/)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 08, 2018, 08:25:40 PM
Posting for Santos

(https://s8.postimg.cc/h8x4ekg81/IMG_20180706_075852.jpg) (https://postimg.cc/image/h8x4ekg81/)

(https://s8.postimg.cc/v3vewnd3l/IMG_20180708_105812.jpg) (https://postimg.cc/image/v3vewnd3l/)

(https://s8.postimg.cc/odexn9v3l/IMG_20180708_105753.jpg) (https://postimg.cc/image/odexn9v3l/)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: iNsane on July 08, 2018, 09:08:35 PM
(https://abload.de/img/screen041a0q6e.jpg)
(https://puu.sh/AT2Fz/a360d581cd.png)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Mace-x on July 08, 2018, 10:39:56 PM
Quote from: Twitch135 on July 07, 2018, 03:18:56 PM
Quote from: Umpossible on July 07, 2018, 02:18:48 PM
Quote from: Twitch135 on July 07, 2018, 02:14:01 PM
Quote from: Mace-x on July 07, 2018, 04:53:55 AM
Quote from: Twitch135 on July 07, 2018, 01:26:24 AM
Quote from: Mace-x on July 06, 2018, 06:55:34 AM
Yisss, i´m in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

It's all good, the person above him rode a 450, he is the 2nd and 3rd rider which was on a 250 2 stroke :) I got caught out by it at first as well lol
Oh shit! Fuck sorry Mace I was looking at the top of your export and it say's 450, but a little ways down it does say RM 250. My apologies. :-)

Hahaha, no problem mate!  ;D

Edit:
Fuck sandy, come on man, stop smoking us!  >:(
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: joao santos 17 on July 08, 2018, 11:17:38 PM
That time get 1 second behind Sandy but i think that lap was slow for him
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Twitch135 on July 08, 2018, 11:24:32 PM
New rule Sandy has to post his lap times first LOL!


Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: mmtroop616 on July 08, 2018, 11:56:39 PM
who else is over the old tracks lol bring on some supercross
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: mmtroop616 on July 08, 2018, 11:59:18 PM
anyone know why im failing security checks lol
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: mmtroop616 on July 09, 2018, 12:08:03 AM
im posting a 1:49.248 ill post the pics once it allows me
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 09, 2018, 08:50:01 AM
Quote from: mmtroop616 on July 09, 2018, 12:08:03 AM
im posting a 1:49.248 ill post the pics once it allows me

If it won't let you post the pics, you can PM me over the forums or Discord if you like :)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: Umpossible on July 09, 2018, 09:15:25 AM
(https://preview.ibb.co/f3NSRo/Screenshot_72.png)
Title: Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
Post by: ChamP_Mx on July 09, 2018, 08:11:34 PM
I can only take high-rez screenshots I don't know why, so that's why im original screenshot didn't save, shame because it was 9 seconds faster, but the lap time window is closed so I will have to settle with this, anyways GG's everybody! :)