MX Bikes Official Forum

Mods => Bikes => Physics => Topic started by: PiBoSo on April 17, 2020, 04:41:48 PM

Title: Front Suspension Geometry
Post by: PiBoSo on April 17, 2020, 04:41:48 PM
MX Bikes supports 4 types of front suspension geometry.

1) "Telescopic". Used on almost all racing bikes.

2) "Push Arm". The front wheel is attached to an arm, with the pivot behind.
Example: speedway bike.

3) "Trail Arm". Same as push arm, but the pivot is in front of the wheel.
Example: Vespa.

4) "Rigid". There is no suspension and the front wheel is connected directly to the steer.
Probably only used on minibikes.
Title: Re: Front Suspension Geometry
Post by: ohlongjohnson on September 16, 2020, 04:55:35 PM
 :) yes suspention update