MX Bikes Official Forum

General Category => Suggestions and wishlist => Topic started by: TomasTheCreator on January 17, 2023, 11:04:42 AM

Title: SEPARATE STEERING AND LEAN?
Post by: TomasTheCreator on January 17, 2023, 11:04:42 AM
@piboso I know this has been talked about frequently before, but I have made a prototype controller that has the ability(axes) to both lean and steer and I would really want to know if there´s some way of seperate the two in the game and if not, do you have plans for it in the future?

Best regards Tomas

Title: Re: SEPARATE STEERING AND LEAN?
Post by: teeds on January 17, 2023, 03:36:58 PM
Just to clarify, by lean do you mean rider or bike lean?

I think you probably just need to use direct steering, the game can then tell your rig where to put the bike based on your steering inputs.
Title: Re: SEPARATE STEERING AND LEAN?
Post by: TomasTheCreator on January 17, 2023, 05:43:09 PM
Quote from: teeds on January 17, 2023, 03:36:58 PMJust to clarify, by lean do you mean rider or bike lean?

I think you probably just need to use direct steering, the game can then tell your rig where to put the bike based on your steering inputs.

Good you pointed that out, I was a little unclear. I meant bike lean, I want to be able to push down/pull up on the handlebars and also turn them at same time if you get my idea!?
Title: Re: SEPARATE STEERING AND LEAN?
Post by: teeds on January 20, 2023, 01:26:24 PM
Pushing and pulling on the bars can be achieved with front and back rider lean. Use this myself by pivoting a desk controller back and forth, feels fairly realistic.

BTW would be good to see some pics of your rig...
Title: Re: SEPARATE STEERING AND LEAN?
Post by: TomasTheCreator on January 26, 2023, 04:39:34 PM
Quote from: teeds on January 20, 2023, 01:26:24 PMPushing and pulling on the bars can be achieved with front and back rider lean. Use this myself by pivoting a desk controller back and forth, feels fairly realistic.

BTW would be good to see some pics of your rig...

I´m going to post some pictures soon :D ´m just working on a proof of concept, but it feels promising!!