There are a few settings that are only available manually editing profile.ini file that is located in profile directory under "profiles" in "My Documents"\PiBoSo\MX Bikes\ save path.
[testing]
deformation_multiplier = 1
1 is the default value. Increase it ( up to 20 ) to have the tires deform the terrain faster.
Testing session only.
[testing]
groove_multiplier = 1
wet_multiplier = 1
1 is the default value. Increase it ( up to 20 ) to have the tires generate groove and dry the track faster. Please note that this affects tires only: the global track surface will still dry at the same ( slow ) rate.
Testing session only.
map_shadow_disable = 1
under the "gfx" section to disable track shadows.
[view]
shiftmul_lat = 1
shiftmul_vert = 1
shiftmul_long = 1
Decrease the values to reduce the effect of g-forces on the first onboard view.
[ext_view]
corner_anticipation=1
To enable the "Corner Anticipation" settings for the external view as well.
By default they are disabled.
[ext_view]
free_look=0
To disable the "Free Look" settings for the external view.
By default they are enabled.
[sim]
air_riderlrlean=1
To re-enable the Beta17 air control.
[testing]
reset_type=1
reset_time=2000
To enable the bike reset delay in testing, too.
"reset_type": 0 -> no bike reset delay; 1 -> fixed time; 2 -> time based on the distance of the rider from the bike; 3 -> time based on the crash speed
"reset_time": if "reset_type" is set to 1, the delay time in milliseconds