To start MX Bikes in testing mode, launch mxbikes.exe with the following params:
mxbikes.exe -testing [-set params (config_file)]
for example:
mxbikes.exe -testing -set params practice.ini
The Configuration file must be saved in the installation folder.
If not set TESTING.INI is used.
[bike]
bike_id = 350xf
paint = official
bike_font = default_black
rider = default_mx
helmet = default
helmet_paint =
goggles_paint =
helmet_cam =
suit_paint = official
suit_font = default_white
boots = default
boots_paint =
gloves_paint =
protection = neck
protection_paint =
[track]
track_id = Practice
track_layout =
[settings]
weather_realistic = 0
weather_conditions = 0
temperature = 25
wind_direction = 0
wind_speed = 0
track_conditions = 0
Hi,
Is it possible to add trainer file to the Configuration file?
Thanks ;)
First post updated to add the protection paint setting.
First post updated to add the rider setting.