• Welcome to MX Bikes Official Forum. Please login or sign up.
 
March 28, 2024, 06:15:14 PM

News:

MX Bikes beta18j available! :)


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - philiaN

541
* MXB: tuning of the HUD gear switch light

* MXB: started support for goggles paint and boots modding
542
Track Editing / Re: Spring Creek - WIP
October 27, 2017, 12:55:45 AM
I wouldnt say that upscaling is bad and that it reduces noticable detail loss.. Maybe in EXTREME conditions, yes, but you cant feel any difference between upscale and level/l3dt version
543
Track Editing / Re: Spring Creek - WIP
October 27, 2017, 12:21:43 AM
Upscale from 57 to 76 (lowered the jumps by 33%)



Normal Scale 57



L3DT Scale 57



Scale 57 - Using Levels in PS



So, i have to upscale / use levels in ps or do it with L3DT

544
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 11:47:43 PM
Can i upload the hm and you will save it in l3dt ? if yes what do you need ? raw png ?
545
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 11:31:17 PM


but first i will try the upscaling method (both should work)

the scale 57 (meters) is def. correct according to google :D
546
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 11:11:57 PM
Quote from: TFC on October 26, 2017, 11:02:18 PM
you just need to find the lowest point and the highest point of the area the heightmap covers on google maps and find the value from that.

That is exactly what i did, but still if the range from scale is 0-100% and my heightmap just using a range of 67% doenst this mean that my height map is 33% smaller than it should be? Hope you understand my problem :D

I think the lowest point is 0 (black)
and the hightest is 57 (white)

that means

my lowest point is around 12 (21% black)
and my highest is around 50 (88% white)

so my range is 38 instead of 57

Hope that helps to understand my problem :D
547
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 10:28:28 PM


I hope some of you can help me.. I feel like the scale isnt right....

In my geolocations i left a wide distance to the track, so i can later cut where i want.. e.g.

The cut out is way smaller..

My scale for the cut out is 57
Piboso said the scale is from black to white.. so does it mean my track is way smaller than 57? Because the range isnt from black to white it is: 21% black to 88% white

If thats the case: I just have to do the math: 21 % + 12% = 33% 57 + 33% = 75,81

Help pls :D
548
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 08:55:30 PM
High point 2017 :)
549
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 08:38:10 PM
Awesome thank you so much @giopanda

im uploading the whole Project, if you need any changes to the base heightmap for some object placements, just tell me and i will change it :)

I haven't done the "last touch" on the base, cause i dont know if i need to change anything :D

You will find it here: https://drive.google.com/open?id=0BwkVCs_TRhy5SjdkRU1Bd0pHRnM
550
Track Editing / Re: Spring Creek - WIP
October 26, 2017, 08:10:31 PM
is there someone who wants to do the objects + placement for this track? And the other tracks im planning to do..

@Norcal are you still wanna help when you are back?
551
Track Editing / Re: Gio pandas message..
October 26, 2017, 10:53:05 AM
I can do it :) Asdrael has no time until sunday  ;)
552
* MXB: ported the animated cables and shock to all bikes

* MXB: added the swingarm in cockpit view, too ( mostly useful for VR users )
553
@Sandbiter that would def. help :)
554
Track Editing / Re: Spring Creek - WIP
October 25, 2017, 07:04:18 PM
Working on a new track :D

555
I made them because some people have problems with doing it (sketchup..) and i need them later too :)