Messages

I tried beta 17 and the truth is that it works perfectly for me, passing the issue of skins, which is solved very easily, I loved the physics.
The bike has more inertia and is less bouncy.
I swear I don't know why everyone complains.

In general it is that.

My only problem now is that I can't get the custom character to work, which BTW, is a feature i been waiting for and im super happy about that.

I totally agree with you.

I find the physics much more consistent.

The bike absorbs bounces better and the front end tends to slide less for nothing.

I think the game is going in the right direction and as pay21 says I am surprised to see so many people complaining about the new update.

"Just don''t play with the mods until they are updated."

[Hi everyone, hi PiBoSo,]

Hi everyone, hi PiBoSo,

Small proposal, would it be possible @PiBoSo to add the option Password Protected in the page of the online servers in the game, as on the image below please?


Because it's becoming quite difficult to find.

In advance I thank you.


If you have other ideas of filters that would be good to add do not hesitate to share them.
Good game everyone.

Original post Here : https://steamcommunity.com/sharedfiles/filedetails/?id=2718821386

Make sure that the configuration wizard is enabled in steam.
How to enable controller support
To enable controller support, go to the top bar and click Steam --> Settings

--> Controller --> General Controller Settings

--> And tick the box to enable support for whichever controller you're using (Xbox, PlayStation, etc)

--> Close the configuration app and fully close out of Steam by going to the top bar and clicking
Steam --> Exit

--> After 5-10 seconds reopen Steam, click Mx Bikes in your games library, and click the 'Controller Configuration' button that has appeared at the end of the bar under the 'Play' button

Enjoy

_______________________________________________________________________________________________________________________________________________________________________

Just a basic configuration of the buttons to be able to use the controller in the menu.

How it Work :
Just press the START button to change the group.

Menu = Active cursor
Default = Personal configuration in the game

COPY + PASTE THIS LINK IN YOUR WEB BROWSER TO DIRECTLY APPLY THE CONFIG THROUGH STEAM :
steam://controllerconfig/655500/2718486958

You can change it to your preference if necessary.
=====================================================================================================


Many thanks to fridgedollar for his help without which none of this would have been possible and Insane for mxb-Wiki.com

Alternative Profil made by Fridgedollar, more button's affected : steam://controllerconfig/655500/2711455083
Take it if you wanna try.

[If you want change anythings go here] : https://mxb-wiki.com/menu-controller-support-workaround-tutorial/

Hey me too
Maybe an update...
It often does that, when there is going to be a small update...
We'll see, hoping it will come back soon

In this update, there is all the new content that has been published since 02/24/2021 on website mxb-mods.

This is part 5 of the pack, in this package : Rider [990Mb] || Bikes [3.84Gb]
 
In this pack, there are 4.81gb of mods but I've compressed the file so that it's little smaller to download = 3.87Gb

Every month on the 24th, I will publish the following part with all the mods that will have been published on mxb-mods.

https://drive.google.com/drive/folders/1DJD3YVEWFjuGotWciBQggX9WpKbbR3J4?usp=sharing

Please take care of yourself.

Part 1 & Part 2 : http://forum.mx-bikes.com/index.php?topic=4043.0
Part 3 : http://forum.mx-bikes.com/index.php?topic=4296.0
Part 4 : http://forum.mx-bikes.com/index.php?topic=4468.0

In this update, there is all the new content that has been published since 01/24/2021 on website mxb-mods.

This is part 4 of the pack, in this package : Rider [ 2.08gb] || Bikes [ 4.25gb]
 
In this pack, there are 6.36gb of mods but I've compressed the file so that it's little smaller to download = 5gb

Every month on the 24th, I will publish the following part with all the mods that will have been published on mxb-mods.

https://drive.google.com/drive/folders/1EP9Pj8jY5zPur2X8aTBuuqrYk7dfYAIi?usp=sharing

Please take care of yourself.

Part 1 & Part 2 : http://forum.mx-bikes.com/index.php?topic=4043.0
Part 3 : http://forum.mx-bikes.com/index.php?topic=4296.0

I've been practicing in some races and was wondering if there's a way to see people's bike graphics and gear setups. Do I need to download every single graphics kit and install them to the corresponding bike or what?

Hi, you need to download all the mods.
 
Part 1 : https://mxb-mods.com/full-shop-all-mxb-mods-huge-pack-14go-bikes-skins-rider-gear-since-the-beginin-to-11-23-2020

Part 2 : https://mxb-mods.com/full-shop-part-2-rider-paints-bikes-paints-boots-gloves-helmet-protections-update-every-month-12-25-2020

Part 3 : https://mxb-mods.com/mega-pack-part-3-rider-bikes-paints-boots-gloves-helmet-updateb15

Or else take what you want but 1 mod by 1 mod at a time

Unfortunately, I would have liked to integrate it in the pack part 3 but I have already published 

I will put it in the pack part 4 next month.

Anyway, great job I love it.

Thank you for your hard work.

Awesome work GHOST. I see you've begun to use GB instead of GO, that's cute, hehe.
Thaks again mate, love! 🤙

Thank you very much for your feedback.
I really appreciate it.
See you soon on the track

[UPADATE 01/24/2021]

UPADATE 01/24/2021

[FR]

Dans cette mise à jour, il y a tous le nouveau contenu qui a était publier depuis le 24/12/2020 sur le site : https://mxb-mods.com/

Voilà la partie 3 du pack,
Chaque mois le 24, je publierai la partie suivante avec tous les mods qui auront étaient publier sûr https://mxb-mods.com/

Dans ce pack, il y a 3.90go de mods mais, j'ai compressé le dossier pour qu'il soit plus petit a télécharger.

https://drive.google.com/drive/folders/17KrBrdbVm-1J2LhMGhRjyoozWUzJJdeQ?usp=sharing

Prenez soin de vous.

[Ici Part 1 & Part 2 : http://forum.mx-bikes.com/index.php?topic=4043.0]

===========================================================================================================================

UPADATE 01/24/2021

[EN]

In this update, there is all the new content that has been published since 24/12/2020 on website https://mxb-mods.com/

This is part 3 of the pack,
Every month on the 24th, I will publish the following part with all the mods that will have been published on https://mxb-mods.com/

In this pack, there are 3.90gb of mods but I've compressed the file so that it's smaller to download.

https://drive.google.com/drive/folders/17KrBrdbVm-1J2LhMGhRjyoozWUzJJdeQ?usp=sharing

Please take care of yourself.

[Here Part 1 & Part 2 : http://forum.mx-bikes.com/index.php?topic=4043.0]

Thank you very much, it's really cool, and very useful for a lot of people.
Well done !!!

Always great work 
Can't wait to get them 

link isnt working

Also works good on my side 

[Great work buddy. Thank you so much for this hard work.Love the track.]

Great work buddy.
Thank you so much for this hard work.
Love the track.

Just a few remarks :

This map would be a 1000 times better if there were decorations/Object on the edge of the runway.

The layout itself is excellent, as is the surface too.

Are you going to add decorations/Object?

Sorry for my english im French.

man this year 2021 i'm starting to learn how to use blender better so by the end all my tracks will be rebut

Great, this is good news

Thank you for your work and your time.
Just a remark/tip, when you make a pack like this, name the files directly as MX2OEM_2020_Husky_TC125, we just copy and paste and everything is done automatically.
Or we have to search each bike one by one, and you don't say if it's FC250 or TC250, it would be nice if you could specify it.
Thanks again for your great work.

  [Edit] Putting your bikes paints on the https://mxb-mods.com/ website would be really great.