Messages

Rode this again for the last couple hours.. once again man, you did great on feeling the power band kick in!!

Thanks! It's still my favorite bike to use. Braaaaaap!

Can always expect quality work from you. Great job!

It does look fantastic though..

Could you have a stab at an engine? I mean, you know roughly how fast a bike goes, you can't bike up steep hills fast, and you only really need to be able to put power down to get moving for downhill.

I've got no projects on, so if you have a go at making a rough engine for it, I'll then have a go at making a few test tracks. But I do think that would be easier to do with a rough idea of how powerful it's going to be.

On a side note, any way of stopping the throttle wrist motion?

I have an engine made up for it, it's just not very fun on any of the tracks. And it's not perfect. It's haven't quite figured how to remove engine braking and whatnot.  I can't do anything about animations unfortunately.

[VIDEO ON ENDURO TRACK:]

How does it ride on the "enduro" track by pib?

Had to give the motor some more power because of all the hills so I dropped the 125 engine in it. But weights and suspension distances are set for the MTB.

VIDEO ON ENDURO TRACK:   https://youtu.be/UpZFtaw-gUo

Pls post a download link!!!!

Would love to work further on it. Been real busy. Also without a proper course, it wouldn't be much fun. mx tracks aren't ideal for MTB unfortunately.

fwiw - I am willing to help or even take over engine homogeneization for the next series. If I undertand correctly, you want to do a 250F series (thanks for organizing this peeps). We can either force 250F MSM engine files on everything (which is already more or less the case, beside I think RC models?) or I can port in the dynos and/or gearboxes of all bikes to make them more individual.

Also, force sign-ups WITH bike choice and possibly skin and paint uploads. So it stays consistent and people don't ride the Husky on Maryland, Yam on JS7 etc because it's better.

All my 250f's and 450's have always used msn engine

RC... I hope the brakes are good on that bike you got..this looks a bit dangermountainous!

  That looks like it will be fun

I somewhat abandoned this a couple months ago. It works really well and is pretty fun, but I've not been able to create a very good mountain trail to test it on. Physics seem to be real good for it, though. Maybe I'll finish it up should someone get a good trail made?

Amazing!
If there is enough interest in MTB, it would be quick and easy enough to add pedaling animation and freewheel support

Yes please
Would love to finish it up.
Wouldn't hurt to open the game to a wider demographic either. I'll bet there are plenty of people looking for a good MTB sim like I have been.

I somewhat abandoned this a couple months ago. It works really well and is pretty fun, but I've not been able to create a very good mountain trail to test it on. Physics seem to be real good for it, though. Maybe I'll finish it up should someone get a good trail made?




Video:
https://dl.dropboxusercontent.com/u/57183019/mxbikes/My%20Movie.mp4

Time to let this die guys. Jay has made his points and has the right to do so. He is allowed to sell his content. He did not make it with the intention of mx-bikes import. At this point it's best to respect his wishes. The attitude of demanding an artist to distribute his work freely will chase many good artists and modders away. There have been plenty of modders that have been generous in donating their time because of their passion for it, but you can't expect this from everyone.

And to be honest, The models were great, but the import was not so great. I can see why he wouldn't want his work displayed as it was. There were plenty of issues with geometry (fork rake angle, etc..), textures and shaders that made them look pretty bad.

I'll clean out the stuff from beta 3 then and get fats to edit the page when he has the time.

Couple more bikes. These ones have been done a while... Just been too busy to upload.

If you like this model and would like to see more content, please consider donating some money at the following link to support development
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=erdchamberlain%40hotmail%2ecom&lc=US&item_name=rc4187&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted

links removed
update bike found here: http://forum.mx-bikes.com/index.php?topic=1455.0

Hi everyone. Here's the first bike I ever started making for this game way back at the beginning of beta 3. Have been real busy, but finally decided to move it to beta 4 and clean it up a bit.
It is my favorite bike to ride in game. Handles so well and so easy to scrub and whip and bring back. Very beginner friendly as well I believe. Hope you all enjoy it. It is no replica, but similar to a 2000's CR 125r.

If you like this model and would like to see more content, please consider donating some money at the following link to support development
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=erdchamberlain%40hotmail%2ecom&lc=US&item_name=rc4187&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted

http://www.mxb-central.com/rc-125/

helmet model object must be named "helmet" before export

keeping it out is totally fine by me