MX Bikes beta18f available!
Started by PiBoSo, October 02, 2014, 02:38:18 PM
mxbikes.exe -dedicated (port number) [-set params (config_file)]
mxbikes.exe -dedicated 54210 -set params dedicated.ini
[connection]name =maxclient =password =admin_password =bandwidth = ; 0 -> very low, 1 -> low, 2 -> medium, 3 -> high, 4 -> very highmax_ping = ; milliseconds. 0 -> no limitwhitelist = ; the filename of the whitelistblacklist = ; the filename of the blacklistpolls_disable = ; if set to 1, polls are disabledlocation = ; information about server locationMOTD = ; message of the day. Use "/r" to split the message in multiple lines.[export]results = ; "html", "xml" or "both". If set it will automatically export results at the end of the last sessiondirectory = ; the directory where results will be saved ( must exist )units = ; 0 -> metric units, 1 -> US units, 2 -> UK unitsprefix = ; filename prefix of resultsincremental = ; 0 or 1. If set to 1, results are exported at the end of each sessioncontacts = ; 1 -> contacts between bikes are added to the XML export, 2 -> contacts with walls are exported, too[replay]save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the racedirectory = ; the directory where replays will be saved ( must exist )prefix = ; filename prefix of replays[event]name = ; the name of the event ( optional )track = ; track ID ( the track folder name, for ex. Practice ). If no track is found, then it is searched in the full names ( for ex. Winchester MXoN )track_layout = ; track layout ( for ex. Short ). Empty -> Default. If "track" is used to search in the full names, then "track_layout" is used as a second filter ( for ex. 2018 to choose between different versions of Nevada )tracks_shuffle = ; 0 -> no shuffling, 1 -> shuffle the tracks at start only, 2 -> re-shuffle the tracks at the end of the listcategory = ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2allowed_bikes = ; list of ID of allowed bikes, separated by a slash. For example: 350xf/450xf[rating]class = ; A -> 2000+, B -> 1600-1999, C -> 1200-1599, D -> 800-1199[weather]realistic = ; 0 or 1, if set to 1, following params are ignoredconditions = ; 0 -> sunny, 1 -> cloudy, 2 -> rainytemperature = ; air temperature, celsiuswind_direction = ; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-westwind_speed = ; meters/secondtrack_conditions = ; 0 -> dry, 1 -> wet[hardcore]force_cockpit = ; 0 or 1no_aids = ; 0 or 1limited_tyre_sets = ; 0 or 1[reset]type = ; 0 -> no bike reset delay, 1 -> fixed time, 2 -> time based on the distance of the rider from the bike, 3 -> time based on the crash speedtime = ; if "type" is set to 1, the delay time in milliseconds[race]open_practice = ; 0 or 1. If set to 1, the following race settings are unusedformat = ; 0 or 1. If set to 1 the qualify race is replaced by a qualify practice session. The pre-qualify session is skipped, tooquick_race = ; 0 or 1. If set to 1 all sessions except for warmup and race2 are skipped. The sighting lap is skipped, toopractice_length = ; minutes. If set to 0, the session is skippedprequalify_length = ; minutes. If set to 0, the session is skippedqualifypractice_length = ; minutes. If set to 0, the session is skippedwarmup_length = ; minutes. If set to 0, the session is skippedsighting_lap = ; 0 or 1race_length_format = ; 0 -> % of full length + 2 laps, 1 -> timed race + extra laps, 2 -> lapsrace_length = ; % of full length. Only used if race_length_format is 0race_minutes = ; only used if race_length_format is 1race_extralaps = ; only used if race_length_format is 1race_laps = ; only used if race_length_format is 2restart_delay = ; server restart time in seconds. The default is 300, 5 minutes. If set at zero, there is no restartpause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"pause_session = ; practice, prequalify, qualifypractice, qualify, warmup, race1 or race2pause_directory = ; the directory where data is saved. The default is "resume"resume = ; the file to load to resume an eventsave = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignoredsave_session = ; practice, prequalify, qualifypractice, qualify, warmup, race1 or race2save_directory = ; the directory where data is saved. The default is "resume"[live]enable = ; 1 or 2 to enable live timing. If set to 1, data is sent through UDP packets ( more info: http://forum.mx-bikes.com/index.php?topic=233.0 ). If set to 2, data is written to a local fileport = ; the UDP port ( only used with "enable = 1" ). If missing or set to 0, port 54220 is usedpassword = ; ( only used with "enable = 1" )file = ; the name of the file to write ( only used with "enable = 2" )track_position = ; 0 or 1. If set to 1, the track centerline and the position of all bikes are written, too ( only used with "enable = 2" )contacts = ; 1 -> contacts between bikes are written, 2 -> contacts with walls are written, too ( only used with "enable = 2" )[remote_admin]enable = ; 1 to enable remote admin ( more info: http://forum.mx-bikes.com/index.php?topic=3891.0 )port = ; the UDP port. If missing or set to 0, port 54230 is usedpassword =[collisions]disable = ; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1max_ping = ; the ping over which collisions are disabled ( but high-ping clients still collide with the low-ping ones ). If set to 0, collisions are never disabled[deformation]scale = ; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )auto_reset = ; 0 or 1. If set to 1, the terrain deformation is reset at the beginning of each session[dynamicsurface]disable = ; 0 or 1. If set to 1, the dynamic track surface is disabledpersistent = ; 0 or 1. If set to 1, the dynamic track surface is not reset between events[polls]disable_during_races = ; 0 or 1. It set to 1, polls are disabled during races[log]file = ; the name of the file to write the dedicated server output to
[entry0]guid = ........[entry1]guid = ........[entry2]steamid = ........
[entry0]guid = ........race_number = ...name = ...name_prefix = ...bike_id = ...spectator = ; 0 or 1. If set to 1, the entry is forced as spectator extra = ........
Quote from: teeds on May 14, 2015, 02:21:20 PMI've been trying this -In the dedicated server text input, it is possible to type:"restart" to reset the serverBut when I type "restart" in the dedi console it only seems to type a message in chat, is there a command symbol of some kind in need to put in front of these dedi console commands?
Quote from: gokitty199 on March 04, 2016, 02:55:22 AMok im hosting my own server, and whenever i have my dedicated server running i cant join any server, not even my own. when i click join on a server it doesnt say connecting, it just gives me the option to cancel the server like thisdoes anyone have a fix? when i close the server it works and im able to relaunch the game and join other servers.
Quote from: PiBoSo on March 04, 2016, 11:35:16 AMQuote from: gokitty199 on March 04, 2016, 02:55:22 AMok im hosting my own server, and whenever i have my dedicated server running i cant join any server, not even my own. when i click join on a server it doesnt say connecting, it just gives me the option to cancel the server like thisdoes anyone have a fix? when i close the server it works and im able to relaunch the game and join other servers.When hosting on the same PC where the client is running, the port must be changed from 10410 to something else, for example 10411.
Quote from: JJS209 on March 15, 2016, 09:08:20 PMis it possible to select that riders crash with each other? now it seems that they drive thru like they are ghosts.
Quote from: geofanatec on March 22, 2016, 12:16:41 AMIf I make a "whitelist" will ONLY those riders be able to join server?