• Welcome to MX Bikes Official Forum. Please login or sign up.
 
April 25, 2024, 02:53:28 AM

News:

MX Bikes beta18j available! :)


How Do You Make Trees?

Started by GoatedEdits_YT, November 04, 2021, 10:11:35 PM

Previous topic - Next topic

GoatedEdits_YT

How do you make trees? thanks in advance

iNsane

How to Plant a Tree


Carefully follow these nine steps to help your tree establish quickly in its new location:

1. The trunk flare is where the trunk expands at the base of the tree. Ensure trunk flare is partially visible after the tree is planted. Remove excess soil prior to planting if flare is not visible.

2. Dig a shallow, broad planting hole. Holes should be 2–3 times wider than the root ball, but only as deep as the root ball.

3. If wrapped, remove any cover from around the root ball and trunk to facilitate root growth. Remove wire basket or cut one or two rings off so it is low-profile and will not interfere with future root growth. Inspect tree root ball for circling roots and straighten, cut, or remove them. Expose the trunk flare if necessary.

4. Place the tree at the proper height. When placing the tree in the hole, lift by the root ball, not the trunk. The majority of tree's roots develop in the top 12 inches (30 cm) of soil. Planting too deep can be harmful to the tree. 

5. Straighten the tree in the hole. Before filling the hole, have someone examine the tree from several angles to confirm it is straight.

6. Fill the hole gently but firmly. Pack soil around the base of the root ball to stabilize it.
Fill the hole firmly to eliminate air pockets. Further reduce air pockets by watering periodically while backfilling. Avoid fertilizing at the time of planting.

7. If staking is necessary, three stakes or underground systems provide optimum support. Studies have shown that trees develop stronger trunks and roots if they are not staked; however, it may be required when planting bare root stock or on windy sites. Remove stakes after first year of growth.

8. Mulch the base of the tree. Place a 2–3 inch (5–7.5 cm) layer of mulch, but be sure not to pile much right against the trunk. A mulch-free area of 1–2 inches (2.5–5 cm) wide at the base of the tree will reduce moist bark and prevent decay.

9. Provide follow-up care. Keep the soil moist by watering at least once a week, barring rain, and more frequently during hot, windy weather. Continue until mid-fall, tapering off as lower temperatures require less-frequent watering.


   🌐 MX Bikes custom content
MXB-Mods.com

   📚 MX Bikes User Wiki
MXB-Wiki.com

   💸 Feel free to donate
PayPal

GoatedEdits_YT

LOL but how do you actually make trees

Resolute Kraken

You need to be more specific.  What have you already tried and what do you really need to know.

GoatedEdits_YT

i need to know like the whole process on how to make a tree or if you have already made one ill just download it

GoatedEdits_YT

also if you know how to get the trees from one of the tracks already in the game ex.washington or assen

Resolute Kraken

No, you can't get trees from existing tracks.  Go to the assets thread where there are trees for you to use.