• Welcome to MX Bikes Official Forum. Please login or sign up.
 
March 28, 2024, 01:41:58 PM

News:

MX Bikes beta18j available! :)


profile.ini

Started by PiBoSo, May 01, 2015, 12:25:20 AM

Previous topic - Next topic

PiBoSo

There are a few settings that are only available manually editing profile.ini file that is located in profile directory under "profiles" in "My Documents"\PiBoSo\MX Bikes\ save path.


[testing]
deformation_multiplier = 1


1 is the default value. Increase it ( up to 20 ) to have the tires deform the terrain faster.
Testing session only.

PiBoSo


[testing]
groove_multiplier = 1
wet_multiplier = 1


1 is the default value. Increase it ( up to 20 ) to have the tires generate groove and dry the track faster. Please note that this affects tires only: the global track surface will still dry at the same ( slow ) rate.
Testing session only.

PiBoSo

July 23, 2017, 11:16:13 PM #2 Last Edit: November 12, 2022, 01:33:36 PM by PiBoSo
map_shadow_disable = 1
under the "gfx" section to disable track shadows.

PiBoSo

[view]
shiftmul_lat = 1
shiftmul_vert = 1
shiftmul_long = 1
Decrease the values to reduce the effect of g-forces on the first onboard view.

PiBoSo

[ext_view]
corner_anticipation=1

To enable the "Corner Anticipation" settings for the external view as well.
By default they are disabled.

PiBoSo

[ext_view]
free_look=0

To disable the "Free Look" settings for the external view.
By default they are enabled.

PiBoSo

[sim]
air_riderlrlean=1

To re-enable the Beta17 air control.

PiBoSo

[testing]
reset_type=1
reset_time=2000

To enable the bike reset delay in testing, too.
"reset_type": 0 -> no bike reset delay; 1 -> fixed time; 2 -> time based on the distance of the rider from the bike; 3 -> time based on the crash speed
"reset_time": if "reset_type" is set to 1, the delay time in milliseconds