Author Topic: Testing.ini  (Read 1814 times)

PiBoSo

  • Administrator
  • Sr. Member
  • *****
  • Posts: 910
    • View Profile
Testing.ini
« on: October 23, 2015, 10:39:59 AM »
To start MX Bikes in testing mode, launch mxbikes.exe with the following params:
Code: [Select]
mxbikes.exe -testing [-set params (config_file)]

for example:
Code: [Select]
mxbikes.exe -testing -set params practice.ini

The Configuration file must be saved in the installation folder.
If not set TESTING.INI is used.

Code: [Select]
[bike]
bike_id = 350xf
paint =
bike_font =
helmet =
helmet_paint =
suit_paint =
suit_font =
boots_paint =
gloves_paint =
protection =

[track]
track_id = Practice
track_layout =

[settings]
weather_realistic = 0
weather_conditions = 0
temperature = 25
wind_direction = 0
wind_speed = 0
track_conditions = 0
« Last Edit: October 23, 2015, 10:46:57 AM by PiBoSo »

Azazel

  • Jr. Member
  • **
  • Posts: 13
    • View Profile
Re: Testing.ini
« Reply #1 on: October 04, 2017, 12:35:37 PM »
Hi,

Is it possible to add trainer file to the Configuration file?

Thanks  ;)