MX Bikes beta13c available!
Started by CSchmied986, March 25, 2016, 02:25:27 am
Quote from: geofanatec on March 25, 2016, 02:41:37 amjust use a value of 0 to 1 (such as .5 or anything else)
Quote from: philiaN on March 25, 2016, 07:55:46 amIf you are on the track go to pit: Under Event Info you can reset the trackAnd you can set the Deformation under: \Documents\PiBoSo\MX Bikes\profiles\YOURProfilename\profile.iniOpen it with Editor, there should be following line: (otherwise you have to add this)[testing]trainer=1deformation_multiplier=0.5i recommend 0.5 or lower like .4 .3 You can go from 0-20 (.1 and .2 you can only see in corners)
Quote from: MUD on March 28, 2016, 04:44:00 pmOn tracks with higher resolution Heightmaps the ruts blend fairly nicely. Personally I usually set it at about 6 inches per pixel which works out to 0.1524 metres per pixel. The higher the Heightmap resolution the better.