MX Bikes Official Forum

***************2025 update is on this page I now have the files and blender on multiple PCs so I can work on this while I am traveling and not handicapped as much as I was on when and where I could work on this project in the past!!!!!!!!!


GO TO PAGE 2! I don't know why The photo files are now too big to upload but very low quality photos on page 2 for now!
Check page two for the FMX updated photos for the cut side number plates and a small update on possible future mods!!!!!!
!!!!!!!!!!!!!!!!!!!!Posted some photos of a quick mock up of what i have done and been working on @8/24/2021 even though slow i jump on to get stuff done when i can unfortunately i wasn't able to keep my accelerated window and have this out before now but something is at least something!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

This will be where I post the files when I am done and have the files imported with the help I have been getting I no longer need the other post I did a mock up of everything I have I will leave a short list of what is left to be built the rest is just minor tweaks. I mocked up most of what I had being these last couple days I made progress where I had been stalling out a lot!!! If I can get something done everyday should be about a couple weeks to a month and the CR should be done and ready to test!!!! Check out the pictures so far and leave any feedback if you see an issue that isn't in the list.

@-2025 After keeping my eye out after one or two blender updates moved the file location of this bike I finally Found it again I am Half way through fixing and re designing the entire engine and its components, there is a ton of geometry on this model and I fear most if imported will not be able to0 run this bike without issues so I am going through part by part every where and lowering poly counts and using better/ the correct meshes in order to not run into the problems I used to keep running into. It has been to long but it is getting exciting now that I finally almost have this together to begin importing.
(Updated) 12/1/2025
What's left to build/
Front brake reservoir- 90% final tweaking
Handle bars(done), levers- (100% NEED PERCHES) & cables
Rebuild foot pegs- Finished
REAR NUMBER PLATES-Finished
Rear fender- (DONE)
SWING ARM- NEED TO FINISH SHAPING AND DESIGNING
GAS TANK-Needs Some final joining and merging
Front number plate- (90%) bar strap only the left
New frame-Finished
Brake calipers
sprockets & rotors
gas cap
Mud flap/guard- finished
New air box boot- finished
Rad. cap
Rear spring rebuild-Finished
Rear shock linkage- (50% total) linkage is finished need to start knuckle
Redesign seat- finished design final sizing started and needed to complete
clutch cover-Redesign finished
Radiator hoses
??Build Chain??? (Not sure if it is needed to template or if it is built into the game)
fork covers- 90% need to cut in half or 3/4 to finalize the shape
Air box- finsihed

I will be posting mock up shots of the FMX version once these items are finished.
Fmx Model/
Cut number plates & air box- Finished Plates need bool cutter work
flip levers- Finished
Trimmed seat - 90% plus a redesigned Original seat

just more pictures.

Been really busy working double shifts and side jobs, not to mention I've got races I'm going to be competing in and plan on going to Unadilla and Budds Creek so I'm behind on where id like to be with this but i mess with it a little here and there when I get the free time and remember i could be working on the CR!

lookin good dude, can't wait

epppic

small stuff

nice progress mang

slower then I'd like but something is better than nothing.

another pain in the ass part down shaping the exhaust side number plate. if it doesn't look exactly correct let me know what you see also started the levers need to make the perches.


JUST A HEADS UP TO NOT EVERYTHING IS GONNA LOOK PERFECTLY IN PLACE AFTER ALL THE PARTS ARE MADE I NEED TO DELETE ALL THE PHOTOS AND ZERO OUT ALL THE MESHES ROTATIONS AND REMATCH EVERYTHING TO BE EXACTLY STRAIGHT!

So quick update thought I'd advance the time table (while remaining relatively close to a test and release window) considering I've got better reference photos now than I ever have. But all I did was get busier. I will be starting a new job at a motorcycle dealership which can help hand and hand with this building bike models for newer bikes if I choose to continue this I will have access to the newer and when older used bikes come in considering ill be assembling and testing everything from snowmobiles and wave runners to Honda, KTM, Suzuki, Yamaha and Kawasaki to Aprilia and Ducati's. and even I think I've seen people asking about pit bikes. So that is a positive but hopefully it frees up time for me to finish the CR before moving on.
Also even though i deleted the other post for this project Thank you to all the people who have helped with refinances and for the interest and  supportive post it makes for good motivation i hope to have people enjoying this bike before too long!!!!!!!!!! 

JUST A REMINDER KEEP AN EYE ON THE OG POST LIST I UPDATE THAT WHEN IM WORKING ON OR HAVE FINISHED PARTS OFF IT. IM TRYING TO NOT HOG THE TOP OF THE FOURM BY UPLOADING PICTURES UNLESS I'VE GOT SOMETHING MAJOR OR FEEL THERE NOTICABLE DIFFERENCE FOR MOCK UP PHOTOS!

Both new seat and fmx shaved seat

more FMX seat shots

looks great, happy to help with the process

don't worry I haven't forgotten about your help

mock up photos

more mock up

didn't wanna over kill the amount of phots but i wanted to post an updated group of photos with what i have so far pieced together

Quote from: aschembri91 on August 25, 2021, 06:44:23 AMdidn't wanna over kill the amount of phots

personally I always like seeing progress pics :) looking good

As Fridge said, keep the pics coming. I personally love seeing the amazing talent of the creators in this community!  ;D

Thank you both of you... I'll post more pictures anytime I have something noticeably different I don't wanna hog up the top of the forum constantly for little things. 

well here are some shots of the new cut number plates for the FMX model I mocked them up to MR. Anger806's CR125 to make the shapes/cuts more visible. Thank you again for the references! Enjoy hopefully I get more done here shortly We are approaching the day at any moment now I can't wait to have these two models finished and imported to see how the model turns out in game. I also asked about doing tear downs at the dealership i work at to taking reference photos of the new 2022 bikes so as soon as i finish this i will move on to making high detail and accurate MX bikes for this game.   

last Number plate photo

since i have the top of the page heres the throttle tube assembly i just did after my last post of the number plates

I am really sorry about how long it has been since I've updated this, or even worked on this I've been trying to learn more about blender, and I am in the process of remaking some of my past objects. Between the last time i updated Blender and lost my files I've had no time to work on this how I wanted too originally. I'd gladly offer the files to anybody with more skill and or anyone who has a completed chassis. Trying to build a full chassis is a real pain in the ass to the point I'm about to section it. i will build one and the topology will be all out of whack and i have to start over again. But since the last OEM update, I noticed there were no 2 strokes in the files the bikes are looking better and better, but I still want to see a bike like mine in the game. Again, sorry for the huge delay and silence   

SO IV'E BEEN WORKING ON A NEW FRAME AND IN BETWEEN FRUSTRATION i'VE BEEN FIXING SOME STUFF AND BUILDING SMALLER PARTS NOT EVERY PART IS IN THESE SHOTS I MADE SOME TWEAKS TO THE EXHAUST IM KIND OF FREE HANDING\EYEING THE CURVATURE OF THE MAIN FRAME SO IVE BEEN CORRECTING THAT AND OTHER PARTS ONCE I SEE ISSUES. JUST HOPING I CAN FINALLY GET THIS DONE!

I haven't forgotten about this project but during the time I have corrected a lot of mistakes I found a frame I just need to get it passable and import it from another save file I have on Blender big pain was how much cluster I had on the screen and the amount of meshes I didn't have sorted so keeping track of small parts to use as bool tools and such made it hard to know exactly what i had Started, done and needed to build. know it has been a while, but I've been learning more and more about blender and getting better at simplifying the workflow so hopefully I have this done soon as I have a decent amount of free time at the moment. I have some photos I took messing around adding color to the meshes just to get an idea of how it will look once it comes together.

1/10/24

New Frame build just have a few more spots to connect and one of the few pain in the ass parts that have held this process up is done

Earlier I was able to upload full resolution photos and now it is back to I can't but the new frame is in place and I remade the rear shock spring

Again sorry I can't upload full Res it sucks but Everything is flowing at a decent pace

FMX airbox and air filter I downloaded the templates for importing it into the game Still some steps in between that still not sure if I need to model wheels or the chain. Some touch up still needed, and I have to go through the entire engine and delete a lot of unneeded geometry that you can't see and get the vertex count do especially for the low poly model.

Started Flip levers may change them to the simple version with only one bend these were some what annoying to make but that is another down that and the kill switch is made. I just have to finish up the clamps for the levers and touch some stuff up on the handlebars.

messing around Fuel & Carb lines mocked up fork guards 

FMX version with levers flipped in

Hey dude, I'm new to MX Bikes (only 100 and something hours) came from unleashed and reflex FMX, I just wanted to know how you're doing with this amazing project. I was thinking the same thing but I'm no good at computers, anyways I'm excited to see someone with the FMX passion you're doing god's work mad respect dude much love

I am working on this again now. I lost the file location for a loooong time and the only files I had were barely when I had a Base for the engine so I had given up. But I have the save file backed up on and in multiple locations I up date the files when ever I come across a Pc  I used for thi.