(WIP)02-07 CR250 Frame Added, Rear Shock Pg2 & FMX, Flip Levers photos Pg.3

[aschembri91]

***************2025 update is on this page I now have the files and blender on multiple PCs so I can work on this while I am traveling and not handicapped as much as I was on when and where I could work on this project in the past!!!!!!!!!


GO TO PAGE 2! I don't know why The photo files are now too big to upload but very low quality photos on page 2 for now!
Check page two for the FMX updated photos for the cut side number plates and a small update on possible future mods!!!!!!
!!!!!!!!!!!!!!!!!!!!Posted some photos of a quick mock up of what i have done and been working on @8/24/2021 even though slow i jump on to get stuff done when i can unfortunately i wasn't able to keep my accelerated window and have this out before now but something is at least something!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

This will be where I post the files when I am done and have the files imported with the help I have been getting I no longer need the other post I did a mock up of everything I have I will leave a short list of what is left to be built the rest is just minor tweaks. I mocked up most of what I had being these last couple days I made progress where I had been stalling out a lot!!! If I can get something done everyday should be about a couple weeks to a month and the CR should be done and ready to test!!!! Check out the pictures so far and leave any feedback if you see an issue that isn't in the list.

@-2025 After keeping my eye out after one or two blender updates moved the file location of this bike I finally Found it again I am Half way through fixing and re designing the entire engine and its components, there is a ton of geometry on this model and I fear most if imported will not be able to0 run this bike without issues so I am going through part by part every where and lowering poly counts and using better/ the correct meshes in order to not run into the problems I used to keep running into. It has been to long but it is getting exciting now that I finally almost have this together to begin importing.
(Updated) 12/1/2025
What's left to build/
Front brake reservoir- 90% final tweaking
Handle bars(done), levers- (100% NEED PERCHES) & cables
Rebuild foot pegs- Finished
REAR NUMBER PLATES-Finished
Rear fender- (DONE)
SWING ARM- NEED TO FINISH SHAPING AND DESIGNING
GAS TANK-Needs Some final joining and merging
Front number plate- (90%) bar strap only the left
New frame-Finished
Brake calipers
sprockets & rotors
gas cap
Mud flap/guard- finished
New air box boot- finished
Rad. cap
Rear spring rebuild-Finished
Rear shock linkage- (50% total) linkage is finished need to start knuckle
Redesign seat- finished design final sizing started and needed to complete
clutch cover-Redesign finished
Radiator hoses
??Build Chain??? (Not sure if it is needed to template or if it is built into the game)
fork covers- 90% need to cut in half or 3/4 to finalize the shape
Air box- finsihed

I will be posting mock up shots of the FMX version once these items are finished.
Fmx Model/
Cut number plates & air box- Finished Plates need bool cutter work
flip levers- Finished
Trimmed seat - 90% plus a redesigned Original seat

[aschembri91]

just more pictures.

[aschembri91]

Been really busy working double shifts and side jobs, not to mention I've got races I'm going to be competing in and plan on going to Unadilla and Budds Creek so I'm behind on where id like to be with this but i mess with it a little here and there when I get the free time and remember i could be working on the CR!

[otisjordan]

lookin good dude, can't wait

[GanjaMan420]

epppic

[aschembri91]

small stuff

[fridgedollar]

nice progress mang

[aschembri91]

slower then I'd like but something is better than nothing.

[aschembri91]

another pain in the ass part down shaping the exhaust side number plate. if it doesn't look exactly correct let me know what you see also started the levers need to make the perches.


JUST A HEADS UP TO NOT EVERYTHING IS GONNA LOOK PERFECTLY IN PLACE AFTER ALL THE PARTS ARE MADE I NEED TO DELETE ALL THE PHOTOS AND ZERO OUT ALL THE MESHES ROTATIONS AND REMATCH EVERYTHING TO BE EXACTLY STRAIGHT!

[aschembri91]

So quick update thought I'd advance the time table (while remaining relatively close to a test and release window) considering I've got better reference photos now than I ever have. But all I did was get busier. I will be starting a new job at a motorcycle dealership which can help hand and hand with this building bike models for newer bikes if I choose to continue this I will have access to the newer and when older used bikes come in considering ill be assembling and testing everything from snowmobiles and wave runners to Honda, KTM, Suzuki, Yamaha and Kawasaki to Aprilia and Ducati's. and even I think I've seen people asking about pit bikes. So that is a positive but hopefully it frees up time for me to finish the CR before moving on.
Also even though i deleted the other post for this project Thank you to all the people who have helped with refinances and for the interest and  supportive post it makes for good motivation i hope to have people enjoying this bike before too long!!!!!!!!!! 

JUST A REMINDER KEEP AN EYE ON THE OG POST LIST I UPDATE THAT WHEN IM WORKING ON OR HAVE FINISHED PARTS OFF IT. IM TRYING TO NOT HOG THE TOP OF THE FOURM BY UPLOADING PICTURES UNLESS I'VE GOT SOMETHING MAJOR OR FEEL THERE NOTICABLE DIFFERENCE FOR MOCK UP PHOTOS!

[aschembri91]

Both new seat and fmx shaved seat

[aschembri91]

more FMX seat shots

[anger806]

looks great, happy to help with the process

[aschembri91]

don't worry I haven't forgotten about your help

[aschembri91]

mock up photos