Issues with dedicated server not showing SOLVED

[GDUBMX]

Solved. See thread. Now Locked

[GDUBMX]

ive had matt and damo help me, all is setup but know one can join. im not sure if its my port forwarding or what? damo said its all good

apparently in the world browser page where you see all the servers, you are supposed to have a ping next to yours.. i have this ---

Code Select Expand

[connection]
name = GDUB's - Motocross Server
maxclient = 16
password =
admin_password = 123
bandwidth = 2 ; 0 -> low, 1 -> medium, 2 -> high
max_ping = 0; milliseconds. 0 -> no limit
whitelist = ; the filename of the whitelist
blacklist = ; the filename of the blacklist
polls_disable =  ; if set to 1, polls are disabled
location = ; information about server location
MOTD = Welcome Motoheads ; . Use "/r" to split the message in multiple lines.

[export]
results =  ; html or xml. If set it will automatically export results at the end of the last session
directory = ; the directory where results will be saved ( must exist )
units = 0 ; 0 -> metric units, 1 -> US units, 2 -> UK units

[replay]
save = ; 0 or 1, If set to 1 it will automatically save the full replay at the end of the race
directory = ; the directory where replays will be saved ( must exist )

[event]
name = ; the name of the event ( optional )
track = FTT; track ID ( for ex. Practice )
track_layout = ; track layout ( for ex. Short ). Empty -> Default;
category = MX1/ ; bike category allowed. Empty -> Open. Multiple categories can be set with a slash in between. For example: MX1/MX2

[rating]
class = ; A -> 2000+, B -> 1600-1999; C -> 1200-1599; D -> 800-1199

[weather]
realistic =0 ; 0 or 1, if set to 1, following params are ignored
conditions =0 ; 0 -> sunny, 1 -> cloudy, 2 -> rainy
temperature = 20; air temperature, celsius
wind_direction = 0; 0 -> north, 1 -> north-east, 2 -> east, ..., 7 -> north-west
wind_speed = 0; meters/second
track_conditions = 0; 0 -> dry, 1 -> wet

[hardcore]
force_cockpit = 0; 0 or 1
no_aids = 0; 0 or 1
limited_tyre_sets = 0; 0 or 1

[race]
quick_race = 0; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = 60; minutes
prequalify_length = ; minutes
warmup_length = ; minutes
sighting_lap = ; 0 or 1
race_length = ; % of full length
race_use_laps = 1; 0 or 1. If set to 1, race_laps is used instead of race_length
race_laps = 5; number of race laps
restart_delay = ; server restart time in seconds
pause = ; 0 or 1. If set to 1, the event is paused and saved at the end of "pause_session"
pause_session = ; practice, prequalify, qualify, warmup, race1 or race2
pause_directory = ; the directory where data is saved. The default is "resume"
resume = ; the file to load to resume an event
save = ; 0 or 1. If set to 1, the event is saved at the end of "save_session". If "pause" is set, this setting is ignored
save_session = ; practice, prequalify, qualify, warmup, race1 or race2
save_directory = ; the directory where data is saved. The default is "resume"

[live]
enable = ; 1 to enable live timing
port = ; the UDP port
password =

[collisions]
disable = 0; 0 or 1. If set to 1, collisions between bikes are disabled. The default is 1

[deformation]
scale = 0.75; 0 to 1. 0 disables the terrain deformation ( values in between like 0.5 are allowed )

[GDUBMX]

Thanks Geo, it all seems to be working now. We figured it was my ZoneAlarm firewall exceptions and my pc needed to restart. Thanks to Damo for helping again late last night haha
How do I register the server on the server list though? Ya know the website one

[GDUBMX]

Ah i see, well ive tried everyhting i can think off. not entirely sure how or where i give those permissions. ive messed about in windows firewall and all seems to be enabled and good to go.

[GDUBMX]

thru team viewer?