Author Topic: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018  (Read 906 times)

Umpossible

  • Full Member
  • ***
  • Posts: 158
  • Umpossible Racing
    • View Profile
FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« on: July 02, 2018, 12:45:28 PM »

Welcome to the Third Round of the Fast Lap Challenge Series 2!

This round will be held at Archview MX.


The Track can be downloaded here: https://www.mediafire.com/file/fye39e1ctoa0khh/archview%283%29.rar
BIG Thank you to Sandbiter for bringing this awesome track to life in MX Bikes!

This page is where you post both screenshots to record your lap time. The round will open at 12:00am Monday the 2nd of July 2018 MX Bikes time (UTC + 0) and will close at 11:59pm Sunday the 8th of July 2018. No lap times will be counted outside of these times.

This week's bike is the MX1OEM 250 2 Stroke (This can be either the YZ or RM)
These bikes can be downloaded here: https://mega.nz/#!NNQDwKLI!gIgM_3nMdFVGgmvT50qz7Vpx_TcnSwmuEEfzo8aoV-o

BIG Thank You to Asdrael for the OEM Pack!

To find the rules and how to enter the competition click this link for more information:

http://forum.mx-bikes.com/index.php?topic=2181.0

Remember that you may only post your lap time once, so even if you do better after initially posting, your result will not be changed. At the same time, do not leave posting your lap time till the last minute as no posts will be counted after the deadline. I know i'll be posting my lap time a day or two early just to be safe.

A discord has been set up (A big Thank You to PhiliaN) in order for players to talk about their times during the week without having to post their final results here.

https://discord.gg/DS5wc96

Standings

Red indicates the winner of the round
Purple indicates that the person did not compete in that round resulting in the same points as Last + 2

Results will be posted shortly after the cut off time. Depending on the amount of applicants the timing of this could vary from week to week.

Thank you to anyone who enters and competes, this will only be a success through community involvement. So tell any friends who also play MX Bikes and get the word out about the series.

If you have any questions, you are more than welcome to PM me.

Good luck and may the fastest rider win!
« Last Edit: July 03, 2018, 03:03:18 PM by Umpossible »

mmtroop616

  • Jr. Member
  • **
  • Posts: 22
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #1 on: July 03, 2018, 03:16:32 AM »
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.

iNsane

  • Full Member
  • ***
  • Posts: 125
  • lol
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #2 on: July 03, 2018, 02:11:06 PM »
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)


searching for kit fonts? -> here

searching for bike fonts? -> here

Twitch135

  • Sr. Member
  • ****
  • Posts: 436
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #3 on: July 03, 2018, 02:36:25 PM »
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)
Awesome thanks for doing this. We all appreciate it.   :)

Umpossible

  • Full Member
  • ***
  • Posts: 158
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #4 on: July 03, 2018, 02:37:12 PM »
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.

Alrighty :) Sounds like a good idea, so you can use a 250 2 stroke this round, YZ or RMZ

Umpossible

  • Full Member
  • ***
  • Posts: 158
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #5 on: July 03, 2018, 02:38:00 PM »
Update for ya'll!

My servers are up and running again! Seems like I accidentially disconnected the LAN cable just before I left my home for the weekend. So that's fixed!
Sorry for messing things up, but now everything's back at how it was and the FLCS2 server is ready :)
Awesome thanks for doing this. We all appreciate it.   :)

Yeah! Huge thank you! :)

Twitch135

  • Sr. Member
  • ****
  • Posts: 436
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #6 on: July 03, 2018, 02:46:35 PM »
just for the fuck of it any chance we can use the rm250? i feel like categories would be more interesting than individual bikes. like 250cc 2 stroke shootout or mx2 oem, ect. i just feel like having a couple choises makes it interesting and more rewarding to people who are willing to put the time in to do some testing on different bikes. just a thought.

Alrighty :) Sounds like a good idea, so you can use a 250 2 stroke this round, YZ or RMZ
Awesome thanks man

Mace-x

  • Hero Member
  • Sr. Member
  • *****
  • Posts: 714
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #7 on: July 06, 2018, 04:55:34 AM »
Yisss, im in  ;D


Twitch135

  • Sr. Member
  • ****
  • Posts: 436
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #8 on: July 06, 2018, 11:26:24 PM »
Yisss, im in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

Mace-x

  • Hero Member
  • Sr. Member
  • *****
  • Posts: 714
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #9 on: July 07, 2018, 02:53:55 AM »
Yisss, im in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?

Twitch135

  • Sr. Member
  • ****
  • Posts: 436
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #10 on: July 07, 2018, 12:14:01 PM »
Yisss, im in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

Umpossible

  • Full Member
  • ***
  • Posts: 158
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #11 on: July 07, 2018, 12:18:48 PM »
Yisss, im in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

Its all good, the person above him rode a 450, he is the 2nd and 3rd rider which was on a 250 2 stroke :) I got caught out by it at first as well lol

Twitch135

  • Sr. Member
  • ****
  • Posts: 436
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #12 on: July 07, 2018, 01:18:56 PM »
Yisss, im in  ;D
Good time man, but this round your supposed to use a 250 2 stroke.

is a rm250 mate, that qualifies right?
Yeah Rm 250 2 stroke will qualify you, but not the RM-Z 450 like your export say's your on.

Its all good, the person above him rode a 450, he is the 2nd and 3rd rider which was on a 250 2 stroke :) I got caught out by it at first as well lol
Oh shit! Fuck sorry Mace I was looking at the top of your export and it say's 450, but a little ways down it does say RM 250. My apologies. :-)

Jimqc

  • Jr. Member
  • **
  • Posts: 12
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #13 on: July 07, 2018, 11:41:21 PM »
my time not very fast this week  :o

ChamP_Mx

  • Jr. Member
  • **
  • Posts: 56
  • Umpossible Racing
    • View Profile
Re: FLCS2 Round 3 - Archview MX - 2/7/2018 to 8/7/2018
« Reply #14 on: July 08, 2018, 04:37:29 AM »
Ok this is ridiculous, haven't been able to get a decent time not because I cant play, but because this broken ass game wont save my times (only saves my slow times were I crash or take it slow), the thing that sucks is I still played regardless and hoped if I made a fast time it would save but nope, I think its a dnf for me this time boys, almost makes me want to stop doing these lol.
"Some take drugs, some drink bottles, i solve my problems by twisting throttles."